Newsletter Search here...

Duratron® T4301/T4501 PAI


The addition of PTFE and graphite provides higher wear resistance and lower coefficient of friction compared to the unfilled grade as well as a lower tendency to stick-slip. Duratron T4301 PAI also offers excellent dimensional stability over a wide temperature range. This extruded Duratron PAI grade excels in severe wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts. Compression moulded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required.

Chemical

Resistance

Electrical

Insulation

Wear

Resistance

Sliding

Properties

Impact

Resistance

-20ºC / +250ºC

Temperature Range

MAIN CHARACTERISTICS


- High maximum service air temperature (250 ° C continuous)

- Excellent retention of mechanical strength, stiffness and creep resistance over a wide temperature range

- Excellent dimensional stability up to 250 ° C

- Very good resistance to UV rays

- Exceptional resistance against high energy radiation (gamma rays and X-rays)

- Inherent low flammability

APPLICATIONS


- Non-lubricated bearings

- Fences

- Bearing cages

- Reciprocating compressor parts

Budget